Need help? Call Us: 01322 388830

Want to place a bulk order? Contact Us

CFP Standard 2 zone conventional fire alarm panel

Product Code: CFP702-4
£109.26 excl. VAT

2-3 Days Delivery

Description

Certified to EN54 parts 2, 4 and 13, C-TEC’s CFP 2 zone conventional fire alarm panel offers an array of user and installer-friendly features at a very competitive price.

Supplied in an attractive flush or surface mountable plastic enclosure, it includes two detector zones, four conventional sounder circuits, class change and alert inputs, on-board fire and fault relays and combined keypad/keyswitch entry.

A wide range of engineering functions are also provided including selectable zone delays, coincidence and non-latching zone facilities. Comprehensive test and fault finding facilities are also provided.

Optional repeaters and relay expansion boards also available.

 

Technical specifications

Approvals/certifications

Certifed to EN54-2 & 4 by the LPCB, Certified to EN54-13 by Kiwa Telefication
Mains supply

230V 50/60Hz.
Mains rated current

350mA maximum.
Internal power supply

19V-28.5V (27V nominal). Ripple 7V maximum (battery fault).
Total output current limited to

1.5A @ 230Vac (ImaxA eq 146mA).
Quiescent current

25mA (mains failed, internal sounder active, PSU & gen fault LED lit)
Max battery size and type

2 x 12V 3.2Ah VRLA connected in series. Min. battery size 1.2Ah.
No. of detector zone circuits

2 (Max. length per circuit is 500m).
Call point resistor value

470 to 680Ω.
Max. devices per detector zone

25 detectors (or 32 detectors/manual call points combined).
No. of conventional sounder circuits

4 (Max. length per circuit is 500m).
EOL resistor value

6800Ω 5% Tol. 0/25W (blue, grey, red, gold).
Alarm voltage

27V max, 20V min (final battery voltage)
Max. sounder output current

4 x 200mA (800mA total).
Auxiliary relays

Two: (1) Aux. Fire; (2) Fault. Volt free single pole changeover. Max. switch current 1A; Max. switch voltage 30Vdc.
Open collector outputs

Two: (1) Reset (Active during reset cycle); (2) Remote (Active during any unsilenced fire condition provided all relevant delays have expired). Max. sink current 30mA, Max. open circuit voltag
Other outputs

24V Aux. Power (Protected by a resettable fuse. 100mA min. hold current. Resets when fault removed).
Auxiliary inputs

Two: (1) ‘Class Change’ (constant sounders); (2) Alert (pulsed sounders). Connect to 0V to trigger, Max. input voltage 27V (non-latching)
Engineer (AL3) functions

Program coincidence (double knock); Invoke One Man Walk Test; Program delays; Set up zones for non-latching operation; Program sounders to resound (or not resound) when a new zone enters al
Expansion connections

Yes – for optional network driver cards (one required per repeater system), relay output cards and EN54-13 sounder circuit interface boards.
Product dimensions (mm)

380 W x 235 H x D 96mm (hole required for flush mounting = 367 W x 220 H x 75 D mm. No bezel required).
Construction & finish

Plastic lid and base; RAL7035 textured
IP Rating

IP30.
Weight

1.75kg (without batteries)
Operating conditions/temperature

-5ºC to +40ºC. Max relative humidity: 95%.   

Download Data Sheets

Click the PDF to download each individual data sheet.

{"id":14978575368578,"title":"CFP Standard 2 zone conventional fire alarm panel","handle":"cfp-standard-2-zone-conventional-fire-alarm-panel","description":"\u003cp\u003eCertified to EN54 parts 2, 4 and 13, C-TEC’s CFP 2 zone conventional fire alarm panel offers an array of user and installer-friendly features at a very competitive price.\u003c\/p\u003e\n\u003cp\u003eSupplied in an attractive flush or surface mountable plastic enclosure, it includes two detector zones, four conventional sounder circuits, class change and alert inputs, on-board fire and fault relays and combined keypad\/keyswitch entry.\u003c\/p\u003e\n\u003cp\u003eA wide range of engineering functions are also provided including selectable zone delays, coincidence and non-latching zone facilities. Comprehensive test and fault finding facilities are also provided.\u003c\/p\u003e\n\u003cp\u003eOptional repeaters and relay expansion boards also available.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable class=\"woocommerce-product-attributes shop_attributes\" aria-label=\"Product Details\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_approvalscertifications\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eApprovals\/certifications\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003eCertifed to EN54-2 \u0026amp; 4 by the LPCB,\u003cspan\u003e \u003c\/span\u003eCertified to EN54-13 by Kiwa Telefication\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_mainssupply\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eMains supply\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e230V 50\/60Hz.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_mainsratedcurrent\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eMains rated current\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e350mA maximum.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_internalpowersupply\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eInternal power supply\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e19V-28.5V (27V nominal). Ripple 7V maximum (battery fault).\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_totaloutputcurrentlimitedto\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eTotal output current limited to\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e1.5A @ 230Vac (ImaxA eq 146mA).\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_quiescentcurrent\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eQuiescent current\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e25mA (mains failed, internal sounder active, PSU \u0026amp; gen fault LED lit)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_maxbatterysizeandtype\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eMax battery size and type\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e2 x 12V 3.2Ah VRLA connected in series. Min. battery size 1.2Ah.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_noofdetectorzonecircuits\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eNo. of detector zone circuits\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e2 (Max. length per circuit is 500m).\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_callpointresistorvalue\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eCall point resistor value\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e470 to 680Ω.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_maxdevicesperdetectorzone\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eMax. devices per detector zone\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e25 detectors (or 32 detectors\/manual call points combined).\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_53-noofconventionalsoundercir\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eNo. of conventional sounder circuits\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e4 (Max. length per circuit is 500m).\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_eolresistorvalue\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eEOL resistor value\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e6800Ω 5% Tol. 0\/25W (blue, grey, red, gold).\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_alarmvoltage\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eAlarm voltage\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e27V max, 20V min (final battery voltage)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_maxsounderoutputcurrent\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eMax. sounder output current\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e4 x 200mA (800mA total).\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_auxiliaryrelays\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eAuxiliary relays\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003eTwo: (1) Aux. Fire; (2) Fault. Volt free single pole changeover. Max. switch current 1A; Max. switch voltage 30Vdc.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_opencollectoroutputs\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eOpen collector outputs\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003eTwo: (1) Reset (Active during reset cycle); (2) Remote (Active during any unsilenced fire condition provided all relevant delays have expired). Max. sink current 30mA, Max. open circuit voltag\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_otheroutputs\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eOther outputs\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e24V Aux. Power (Protected by a resettable fuse. 100mA min. hold current. Resets when fault removed).\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_auxiliaryinputs\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eAuxiliary inputs\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003eTwo: (1) ‘Class Change’ (constant sounders); (2) Alert (pulsed sounders). Connect to 0V to trigger, Max. input voltage 27V (non-latching)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_engineeral3functions\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eEngineer (AL3) functions\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003eProgram coincidence (double knock); Invoke One Man Walk Test; Program delays; Set up zones for non-latching operation; Program sounders to resound (or not resound) when a new zone enters al\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_expansionconnections\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eExpansion connections\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003eYes – for optional network driver cards (one required per repeater system), relay output cards and EN54-13 sounder circuit interface boards.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_productdimensionsmm\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eProduct dimensions (mm)\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e380 W x 235 H x D 96mm (hole required for flush mounting = 367 W x 220 H x 75 D mm. No bezel required).\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_constructionfinish\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eConstruction \u0026amp; finish\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003ePlastic lid and base; RAL7035 textured\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_iprating\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eIP Rating\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003eIP30.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_weight\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e1.75kg (without batteries)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_c5-operatingconditionstempera\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eOperating conditions\/temperature\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e-5ºC to +40ºC. Max relative humidity: 95%.   \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","published_at":"2025-07-01T12:50:31+01:00","created_at":"2025-05-06T14:18:50+01:00","vendor":"C-Tec","type":"","tags":["C-Tec","Commercial","Conventional","Conventional Fire Alarm Panels","Fire Detection","Fire Rated","Fire Safety","Residential"],"price":10926,"price_min":10926,"price_max":10926,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":55180084281730,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CFP702-4","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"CFP Standard 2 zone conventional fire alarm panel","public_title":null,"options":["Default Title"],"price":10926,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.inbuilduk.com\/cdn\/shop\/files\/p_1_4_4_144-CFP-Standard-2-Zone-Conventional-Fire-Alarm-Panel.png?v=1751274873","\/\/www.inbuilduk.com\/cdn\/shop\/files\/p_1_4_5_145-CFP-Standard-2-Zone-Conventional-Fire-Alarm-Panel-600x600.jpg?v=1751274872","\/\/www.inbuilduk.com\/cdn\/shop\/files\/p_1_4_6_146-CFP-Standard-2-Zone-Conventional-Fire-Alarm-Panel-600x600.jpg?v=1751274872","\/\/www.inbuilduk.com\/cdn\/shop\/files\/p_1_4_7_147-CFP-Standard-2-Zone-Conventional-Fire-Alarm-Panel-Schematic.png?v=1751274872"],"featured_image":"\/\/www.inbuilduk.com\/cdn\/shop\/files\/p_1_4_4_144-CFP-Standard-2-Zone-Conventional-Fire-Alarm-Panel.png?v=1751274873","options":["Title"],"media":[{"alt":null,"id":64957277897090,"position":1,"preview_image":{"aspect_ratio":1.0,"height":750,"width":750,"src":"\/\/www.inbuilduk.com\/cdn\/shop\/files\/p_1_4_4_144-CFP-Standard-2-Zone-Conventional-Fire-Alarm-Panel.png?v=1751274873"},"aspect_ratio":1.0,"height":750,"media_type":"image","src":"\/\/www.inbuilduk.com\/cdn\/shop\/files\/p_1_4_4_144-CFP-Standard-2-Zone-Conventional-Fire-Alarm-Panel.png?v=1751274873","width":750},{"alt":null,"id":64957277929858,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.inbuilduk.com\/cdn\/shop\/files\/p_1_4_5_145-CFP-Standard-2-Zone-Conventional-Fire-Alarm-Panel-600x600.jpg?v=1751274872"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.inbuilduk.com\/cdn\/shop\/files\/p_1_4_5_145-CFP-Standard-2-Zone-Conventional-Fire-Alarm-Panel-600x600.jpg?v=1751274872","width":600},{"alt":null,"id":64957277962626,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.inbuilduk.com\/cdn\/shop\/files\/p_1_4_6_146-CFP-Standard-2-Zone-Conventional-Fire-Alarm-Panel-600x600.jpg?v=1751274872"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.inbuilduk.com\/cdn\/shop\/files\/p_1_4_6_146-CFP-Standard-2-Zone-Conventional-Fire-Alarm-Panel-600x600.jpg?v=1751274872","width":600},{"alt":null,"id":64957277995394,"position":4,"preview_image":{"aspect_ratio":1.0,"height":750,"width":750,"src":"\/\/www.inbuilduk.com\/cdn\/shop\/files\/p_1_4_7_147-CFP-Standard-2-Zone-Conventional-Fire-Alarm-Panel-Schematic.png?v=1751274872"},"aspect_ratio":1.0,"height":750,"media_type":"image","src":"\/\/www.inbuilduk.com\/cdn\/shop\/files\/p_1_4_7_147-CFP-Standard-2-Zone-Conventional-Fire-Alarm-Panel-Schematic.png?v=1751274872","width":750}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eCertified to EN54 parts 2, 4 and 13, C-TEC’s CFP 2 zone conventional fire alarm panel offers an array of user and installer-friendly features at a very competitive price.\u003c\/p\u003e\n\u003cp\u003eSupplied in an attractive flush or surface mountable plastic enclosure, it includes two detector zones, four conventional sounder circuits, class change and alert inputs, on-board fire and fault relays and combined keypad\/keyswitch entry.\u003c\/p\u003e\n\u003cp\u003eA wide range of engineering functions are also provided including selectable zone delays, coincidence and non-latching zone facilities. Comprehensive test and fault finding facilities are also provided.\u003c\/p\u003e\n\u003cp\u003eOptional repeaters and relay expansion boards also available.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable class=\"woocommerce-product-attributes shop_attributes\" aria-label=\"Product Details\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_approvalscertifications\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eApprovals\/certifications\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003eCertifed to EN54-2 \u0026amp; 4 by the LPCB,\u003cspan\u003e \u003c\/span\u003eCertified to EN54-13 by Kiwa Telefication\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_mainssupply\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eMains supply\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e230V 50\/60Hz.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_mainsratedcurrent\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eMains rated current\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e350mA maximum.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_internalpowersupply\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eInternal power supply\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e19V-28.5V (27V nominal). Ripple 7V maximum (battery fault).\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_totaloutputcurrentlimitedto\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eTotal output current limited to\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e1.5A @ 230Vac (ImaxA eq 146mA).\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_quiescentcurrent\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eQuiescent current\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e25mA (mains failed, internal sounder active, PSU \u0026amp; gen fault LED lit)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_maxbatterysizeandtype\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eMax battery size and type\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e2 x 12V 3.2Ah VRLA connected in series. Min. battery size 1.2Ah.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_noofdetectorzonecircuits\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eNo. of detector zone circuits\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e2 (Max. length per circuit is 500m).\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_callpointresistorvalue\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eCall point resistor value\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e470 to 680Ω.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_maxdevicesperdetectorzone\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eMax. devices per detector zone\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e25 detectors (or 32 detectors\/manual call points combined).\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_53-noofconventionalsoundercir\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eNo. of conventional sounder circuits\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e4 (Max. length per circuit is 500m).\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_eolresistorvalue\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eEOL resistor value\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e6800Ω 5% Tol. 0\/25W (blue, grey, red, gold).\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_alarmvoltage\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eAlarm voltage\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e27V max, 20V min (final battery voltage)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_maxsounderoutputcurrent\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eMax. sounder output current\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e4 x 200mA (800mA total).\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_auxiliaryrelays\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eAuxiliary relays\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003eTwo: (1) Aux. Fire; (2) Fault. Volt free single pole changeover. Max. switch current 1A; Max. switch voltage 30Vdc.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_opencollectoroutputs\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eOpen collector outputs\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003eTwo: (1) Reset (Active during reset cycle); (2) Remote (Active during any unsilenced fire condition provided all relevant delays have expired). Max. sink current 30mA, Max. open circuit voltag\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_otheroutputs\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eOther outputs\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e24V Aux. Power (Protected by a resettable fuse. 100mA min. hold current. Resets when fault removed).\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_auxiliaryinputs\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eAuxiliary inputs\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003eTwo: (1) ‘Class Change’ (constant sounders); (2) Alert (pulsed sounders). Connect to 0V to trigger, Max. input voltage 27V (non-latching)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_engineeral3functions\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eEngineer (AL3) functions\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003eProgram coincidence (double knock); Invoke One Man Walk Test; Program delays; Set up zones for non-latching operation; Program sounders to resound (or not resound) when a new zone enters al\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_expansionconnections\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eExpansion connections\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003eYes – for optional network driver cards (one required per repeater system), relay output cards and EN54-13 sounder circuit interface boards.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_productdimensionsmm\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eProduct dimensions (mm)\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e380 W x 235 H x D 96mm (hole required for flush mounting = 367 W x 220 H x 75 D mm. No bezel required).\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_constructionfinish\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eConstruction \u0026amp; finish\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003ePlastic lid and base; RAL7035 textured\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_iprating\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eIP Rating\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003eIP30.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_weight\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e1.75kg (without batteries)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_c5-operatingconditionstempera\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eOperating conditions\/temperature\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e-5ºC to +40ºC. Max relative humidity: 95%.   \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e"}
C-Tec

CFP Standard 2 zone conventional fire alarm panel

£109.26 excl. VAT

Certified to EN54 parts 2, 4 and 13, C-TEC’s CFP 2 zone conventional fire alarm panel offers an array of user and installer-friendly features at a very competitive price.

Supplied in an attractive flush or surface mountable plastic enclosure, it includes two detector zones, four conventional sounder circuits, class change and alert inputs, on-board fire and fault relays and combined keypad/keyswitch entry.

A wide range of engineering functions are also provided including selectable zone delays, coincidence and non-latching zone facilities. Comprehensive test and fault finding facilities are also provided.

Optional repeaters and relay expansion boards also available.

 

Technical specifications

Approvals/certifications

Certifed to EN54-2 & 4 by the LPCB, Certified to EN54-13 by Kiwa Telefication
Mains supply

230V 50/60Hz.
Mains rated current

350mA maximum.
Internal power supply

19V-28.5V (27V nominal). Ripple 7V maximum (battery fault).
Total output current limited to

1.5A @ 230Vac (ImaxA eq 146mA).
Quiescent current

25mA (mains failed, internal sounder active, PSU & gen fault LED lit)
Max battery size and type

2 x 12V 3.2Ah VRLA connected in series. Min. battery size 1.2Ah.
No. of detector zone circuits

2 (Max. length per circuit is 500m).
Call point resistor value

470 to 680Ω.
Max. devices per detector zone

25 detectors (or 32 detectors/manual call points combined).
No. of conventional sounder circuits

4 (Max. length per circuit is 500m).
EOL resistor value

6800Ω 5% Tol. 0/25W (blue, grey, red, gold).
Alarm voltage

27V max, 20V min (final battery voltage)
Max. sounder output current

4 x 200mA (800mA total).
Auxiliary relays

Two: (1) Aux. Fire; (2) Fault. Volt free single pole changeover. Max. switch current 1A; Max. switch voltage 30Vdc.
Open collector outputs

Two: (1) Reset (Active during reset cycle); (2) Remote (Active during any unsilenced fire condition provided all relevant delays have expired). Max. sink current 30mA, Max. open circuit voltag
Other outputs

24V Aux. Power (Protected by a resettable fuse. 100mA min. hold current. Resets when fault removed).
Auxiliary inputs

Two: (1) ‘Class Change’ (constant sounders); (2) Alert (pulsed sounders). Connect to 0V to trigger, Max. input voltage 27V (non-latching)
Engineer (AL3) functions

Program coincidence (double knock); Invoke One Man Walk Test; Program delays; Set up zones for non-latching operation; Program sounders to resound (or not resound) when a new zone enters al
Expansion connections

Yes – for optional network driver cards (one required per repeater system), relay output cards and EN54-13 sounder circuit interface boards.
Product dimensions (mm)

380 W x 235 H x D 96mm (hole required for flush mounting = 367 W x 220 H x 75 D mm. No bezel required).
Construction & finish

Plastic lid and base; RAL7035 textured
IP Rating

IP30.
Weight

1.75kg (without batteries)
Operating conditions/temperature

-5ºC to +40ºC. Max relative humidity: 95%.   
View product

  • Secure Payment

    Shop with confidence – your transactions are protected with industry-standard encryption and trusted payment gateways.

  • Technical Support

    Need advice? Our expert team is on hand to help you choose the right products and support your project from start to finish.

  • Fast Dispatch

    Order today, we’ll ship today.* With a huge range in stock, we offer rapid dispatch to keep your project moving.
{"id":14978575368578,"title":"CFP Standard 2 zone conventional fire alarm panel","handle":"cfp-standard-2-zone-conventional-fire-alarm-panel","description":"\u003cp\u003eCertified to EN54 parts 2, 4 and 13, C-TEC’s CFP 2 zone conventional fire alarm panel offers an array of user and installer-friendly features at a very competitive price.\u003c\/p\u003e\n\u003cp\u003eSupplied in an attractive flush or surface mountable plastic enclosure, it includes two detector zones, four conventional sounder circuits, class change and alert inputs, on-board fire and fault relays and combined keypad\/keyswitch entry.\u003c\/p\u003e\n\u003cp\u003eA wide range of engineering functions are also provided including selectable zone delays, coincidence and non-latching zone facilities. Comprehensive test and fault finding facilities are also provided.\u003c\/p\u003e\n\u003cp\u003eOptional repeaters and relay expansion boards also available.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable class=\"woocommerce-product-attributes shop_attributes\" aria-label=\"Product Details\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_approvalscertifications\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eApprovals\/certifications\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003eCertifed to EN54-2 \u0026amp; 4 by the LPCB,\u003cspan\u003e \u003c\/span\u003eCertified to EN54-13 by Kiwa Telefication\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_mainssupply\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eMains supply\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e230V 50\/60Hz.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_mainsratedcurrent\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eMains rated current\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e350mA maximum.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_internalpowersupply\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eInternal power supply\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e19V-28.5V (27V nominal). Ripple 7V maximum (battery fault).\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_totaloutputcurrentlimitedto\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eTotal output current limited to\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e1.5A @ 230Vac (ImaxA eq 146mA).\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_quiescentcurrent\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eQuiescent current\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e25mA (mains failed, internal sounder active, PSU \u0026amp; gen fault LED lit)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_maxbatterysizeandtype\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eMax battery size and type\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e2 x 12V 3.2Ah VRLA connected in series. Min. battery size 1.2Ah.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_noofdetectorzonecircuits\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eNo. of detector zone circuits\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e2 (Max. length per circuit is 500m).\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_callpointresistorvalue\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eCall point resistor value\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e470 to 680Ω.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_maxdevicesperdetectorzone\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eMax. devices per detector zone\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e25 detectors (or 32 detectors\/manual call points combined).\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_53-noofconventionalsoundercir\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eNo. of conventional sounder circuits\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e4 (Max. length per circuit is 500m).\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_eolresistorvalue\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eEOL resistor value\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e6800Ω 5% Tol. 0\/25W (blue, grey, red, gold).\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_alarmvoltage\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eAlarm voltage\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e27V max, 20V min (final battery voltage)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_maxsounderoutputcurrent\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eMax. sounder output current\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e4 x 200mA (800mA total).\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_auxiliaryrelays\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eAuxiliary relays\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003eTwo: (1) Aux. Fire; (2) Fault. Volt free single pole changeover. Max. switch current 1A; Max. switch voltage 30Vdc.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_opencollectoroutputs\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eOpen collector outputs\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003eTwo: (1) Reset (Active during reset cycle); (2) Remote (Active during any unsilenced fire condition provided all relevant delays have expired). Max. sink current 30mA, Max. open circuit voltag\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_otheroutputs\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eOther outputs\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e24V Aux. Power (Protected by a resettable fuse. 100mA min. hold current. Resets when fault removed).\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_auxiliaryinputs\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eAuxiliary inputs\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003eTwo: (1) ‘Class Change’ (constant sounders); (2) Alert (pulsed sounders). Connect to 0V to trigger, Max. input voltage 27V (non-latching)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_engineeral3functions\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eEngineer (AL3) functions\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003eProgram coincidence (double knock); Invoke One Man Walk Test; Program delays; Set up zones for non-latching operation; Program sounders to resound (or not resound) when a new zone enters al\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_expansionconnections\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eExpansion connections\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003eYes – for optional network driver cards (one required per repeater system), relay output cards and EN54-13 sounder circuit interface boards.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_productdimensionsmm\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eProduct dimensions (mm)\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e380 W x 235 H x D 96mm (hole required for flush mounting = 367 W x 220 H x 75 D mm. No bezel required).\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_constructionfinish\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eConstruction \u0026amp; finish\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003ePlastic lid and base; RAL7035 textured\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_iprating\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eIP Rating\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003eIP30.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_weight\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e1.75kg (without batteries)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_c5-operatingconditionstempera\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eOperating conditions\/temperature\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e-5ºC to +40ºC. Max relative humidity: 95%.   \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","published_at":"2025-07-01T12:50:31+01:00","created_at":"2025-05-06T14:18:50+01:00","vendor":"C-Tec","type":"","tags":["C-Tec","Commercial","Conventional","Conventional Fire Alarm Panels","Fire Detection","Fire Rated","Fire Safety","Residential"],"price":10926,"price_min":10926,"price_max":10926,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":55180084281730,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CFP702-4","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"CFP Standard 2 zone conventional fire alarm panel","public_title":null,"options":["Default Title"],"price":10926,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.inbuilduk.com\/cdn\/shop\/files\/p_1_4_4_144-CFP-Standard-2-Zone-Conventional-Fire-Alarm-Panel.png?v=1751274873","\/\/www.inbuilduk.com\/cdn\/shop\/files\/p_1_4_5_145-CFP-Standard-2-Zone-Conventional-Fire-Alarm-Panel-600x600.jpg?v=1751274872","\/\/www.inbuilduk.com\/cdn\/shop\/files\/p_1_4_6_146-CFP-Standard-2-Zone-Conventional-Fire-Alarm-Panel-600x600.jpg?v=1751274872","\/\/www.inbuilduk.com\/cdn\/shop\/files\/p_1_4_7_147-CFP-Standard-2-Zone-Conventional-Fire-Alarm-Panel-Schematic.png?v=1751274872"],"featured_image":"\/\/www.inbuilduk.com\/cdn\/shop\/files\/p_1_4_4_144-CFP-Standard-2-Zone-Conventional-Fire-Alarm-Panel.png?v=1751274873","options":["Title"],"media":[{"alt":null,"id":64957277897090,"position":1,"preview_image":{"aspect_ratio":1.0,"height":750,"width":750,"src":"\/\/www.inbuilduk.com\/cdn\/shop\/files\/p_1_4_4_144-CFP-Standard-2-Zone-Conventional-Fire-Alarm-Panel.png?v=1751274873"},"aspect_ratio":1.0,"height":750,"media_type":"image","src":"\/\/www.inbuilduk.com\/cdn\/shop\/files\/p_1_4_4_144-CFP-Standard-2-Zone-Conventional-Fire-Alarm-Panel.png?v=1751274873","width":750},{"alt":null,"id":64957277929858,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.inbuilduk.com\/cdn\/shop\/files\/p_1_4_5_145-CFP-Standard-2-Zone-Conventional-Fire-Alarm-Panel-600x600.jpg?v=1751274872"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.inbuilduk.com\/cdn\/shop\/files\/p_1_4_5_145-CFP-Standard-2-Zone-Conventional-Fire-Alarm-Panel-600x600.jpg?v=1751274872","width":600},{"alt":null,"id":64957277962626,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.inbuilduk.com\/cdn\/shop\/files\/p_1_4_6_146-CFP-Standard-2-Zone-Conventional-Fire-Alarm-Panel-600x600.jpg?v=1751274872"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.inbuilduk.com\/cdn\/shop\/files\/p_1_4_6_146-CFP-Standard-2-Zone-Conventional-Fire-Alarm-Panel-600x600.jpg?v=1751274872","width":600},{"alt":null,"id":64957277995394,"position":4,"preview_image":{"aspect_ratio":1.0,"height":750,"width":750,"src":"\/\/www.inbuilduk.com\/cdn\/shop\/files\/p_1_4_7_147-CFP-Standard-2-Zone-Conventional-Fire-Alarm-Panel-Schematic.png?v=1751274872"},"aspect_ratio":1.0,"height":750,"media_type":"image","src":"\/\/www.inbuilduk.com\/cdn\/shop\/files\/p_1_4_7_147-CFP-Standard-2-Zone-Conventional-Fire-Alarm-Panel-Schematic.png?v=1751274872","width":750}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eCertified to EN54 parts 2, 4 and 13, C-TEC’s CFP 2 zone conventional fire alarm panel offers an array of user and installer-friendly features at a very competitive price.\u003c\/p\u003e\n\u003cp\u003eSupplied in an attractive flush or surface mountable plastic enclosure, it includes two detector zones, four conventional sounder circuits, class change and alert inputs, on-board fire and fault relays and combined keypad\/keyswitch entry.\u003c\/p\u003e\n\u003cp\u003eA wide range of engineering functions are also provided including selectable zone delays, coincidence and non-latching zone facilities. Comprehensive test and fault finding facilities are also provided.\u003c\/p\u003e\n\u003cp\u003eOptional repeaters and relay expansion boards also available.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable class=\"woocommerce-product-attributes shop_attributes\" aria-label=\"Product Details\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_approvalscertifications\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eApprovals\/certifications\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003eCertifed to EN54-2 \u0026amp; 4 by the LPCB,\u003cspan\u003e \u003c\/span\u003eCertified to EN54-13 by Kiwa Telefication\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_mainssupply\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eMains supply\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e230V 50\/60Hz.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_mainsratedcurrent\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eMains rated current\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e350mA maximum.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_internalpowersupply\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eInternal power supply\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e19V-28.5V (27V nominal). Ripple 7V maximum (battery fault).\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_totaloutputcurrentlimitedto\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eTotal output current limited to\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e1.5A @ 230Vac (ImaxA eq 146mA).\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_quiescentcurrent\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eQuiescent current\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e25mA (mains failed, internal sounder active, PSU \u0026amp; gen fault LED lit)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_maxbatterysizeandtype\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eMax battery size and type\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e2 x 12V 3.2Ah VRLA connected in series. Min. battery size 1.2Ah.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_noofdetectorzonecircuits\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eNo. of detector zone circuits\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e2 (Max. length per circuit is 500m).\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_callpointresistorvalue\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eCall point resistor value\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e470 to 680Ω.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_maxdevicesperdetectorzone\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eMax. devices per detector zone\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e25 detectors (or 32 detectors\/manual call points combined).\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_53-noofconventionalsoundercir\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eNo. of conventional sounder circuits\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e4 (Max. length per circuit is 500m).\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_eolresistorvalue\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eEOL resistor value\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e6800Ω 5% Tol. 0\/25W (blue, grey, red, gold).\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_alarmvoltage\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eAlarm voltage\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e27V max, 20V min (final battery voltage)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_maxsounderoutputcurrent\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eMax. sounder output current\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e4 x 200mA (800mA total).\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_auxiliaryrelays\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eAuxiliary relays\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003eTwo: (1) Aux. Fire; (2) Fault. Volt free single pole changeover. Max. switch current 1A; Max. switch voltage 30Vdc.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_opencollectoroutputs\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eOpen collector outputs\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003eTwo: (1) Reset (Active during reset cycle); (2) Remote (Active during any unsilenced fire condition provided all relevant delays have expired). Max. sink current 30mA, Max. open circuit voltag\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_otheroutputs\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eOther outputs\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e24V Aux. Power (Protected by a resettable fuse. 100mA min. hold current. Resets when fault removed).\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_auxiliaryinputs\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eAuxiliary inputs\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003eTwo: (1) ‘Class Change’ (constant sounders); (2) Alert (pulsed sounders). Connect to 0V to trigger, Max. input voltage 27V (non-latching)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_engineeral3functions\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eEngineer (AL3) functions\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003eProgram coincidence (double knock); Invoke One Man Walk Test; Program delays; Set up zones for non-latching operation; Program sounders to resound (or not resound) when a new zone enters al\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_expansionconnections\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eExpansion connections\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003eYes – for optional network driver cards (one required per repeater system), relay output cards and EN54-13 sounder circuit interface boards.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_productdimensionsmm\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eProduct dimensions (mm)\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e380 W x 235 H x D 96mm (hole required for flush mounting = 367 W x 220 H x 75 D mm. No bezel required).\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_constructionfinish\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eConstruction \u0026amp; finish\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003ePlastic lid and base; RAL7035 textured\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_iprating\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eIP Rating\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003eIP30.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_weight\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e1.75kg (without batteries)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"woocommerce-product-attributes-item woocommerce-product-attributes-item--attribute_pa_c5-operatingconditionstempera\"\u003e\n\u003cth class=\"woocommerce-product-attributes-item__label\" scope=\"row\"\u003eOperating conditions\/temperature\u003c\/th\u003e\n\u003ctd class=\"woocommerce-product-attributes-item__value\"\u003e\n\u003cp\u003e-5ºC to +40ºC. Max relative humidity: 95%.   \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e"}