PSU 5 Series 24V 3A boxed Switch Mode caged
PSU 5 Series 24V 3A boxed Switch Mode caged is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
                    
                      Description
                      
                      
    
                    
                  
                  Description
- A powerful switch mode/digital hybrid PSU that can be customised to suit your exact requirements – see More Information tab for details.
 - Plastic cover on PSU PCB guards against touching live parts (to VDE 0100-410).
 - Includes the same electronics as our BF562-3 LPCB/VDS certified EN54-4/A2 boxed 24V 3A PSU.
 - Metal base plate facilitates straightforward mounting inside third-party OEM enclosures.
 - Includes a single-pole volt-free changeover relay that switches for any fault condition.
 - Includes a fault type & hazardous voltages present LED.
 - Two selectable battery charge currents.
 - Battery fault impedance limits can be optimised to suit load current (helps extend battery life)*.
 - Mains fail simulation mode.
 - Improved on-board temperature sensor with optional remote sensor.
 - Electronic functions comply with EN50131-6 grades 1-4 for security applications.
 
Technical Specifications
| Approvals/certifications | 
 Includes the same electronics as our EN54-4/A2 certified BF562-3 PSU  | 
|---|---|
| Compatibility | 
 *** Full compliance with all relevant standards must be checked by the responsible person with the caged PSU installed in a suitable enclosure ***  | 
| Application/operation | 
 An encased Mains to regulated DC switch-mode/digital hybrid power supply providing 3A @ 24V DC. It includes a single pole volt-free changeover relay that switches for any fault condition. User cust  | 
| Mains supply | 
 230V 50/60Hz.  | 
| Mains rated current | 
 800mA r.m.s.  | 
| Total output current limited to | 
 3A (Max. output current).  | 
| Output | 
 I max.a: 2.6A or 2A selectable. A load greater than I max.a will temporarily reduce batt. charging. I.max.b: 3A, charging turned off via CONN6. Output is also customisable via a BF423 Configurator*  | 
| Battery charge capacity | 
 2.5Ah up to 17Ah (battery charged to 80% capacity in 24hrs). Output is customisable via a BF423 Configurator to suit different manufacturers' batteries*.  | 
| Max battery size and type | 
 Up to 17Ah VRLA dependent on the size of the enclosure the BF562-3/E is mounted in.  | 
| Indicators | 
 Supply Present (Green); General Fault (Amber); Auxiliary Fault (Amber); Hazardous Voltages Present (Red).  | 
| Connections | 
 Mains Input (CONN1); Supply Output (CONN3); Battery Input (CONN3); Fault Relay (CONN4); Charge Off Input (CONN5). Battery Charge Current Link (PLK1); Battery Monitoring On/Off Link (PLK2); High Tem  | 
| Expansion connections | 
 A remote thermistor can be connected via PL3 terminals.  | 
| Product dimensions (mm) | 
 143mm H x 173mm W x 66mm D.  | 
| Construction & finish | 
 Zintec base, polycarbonate cover.  | 
| IP Rating | 
 Dependent on mounting enclosure.  | 
| Weight | 
 665g (without batteries).  | 
| Operating conditions/temperature | 
 -5ºC to +40ºC. Max relative humidity: 95%.  | 
            
      